F E A T U R E S AT5140 Tol Tag® • Exterior mounting • Factory-programmed or field-programmable • 120-bit storage • Security coding available • Powered by lithium • 10-year average service The AT5140 TollTag® is a battery-powered field disturbance device used in the 915 MHz radio frequency (RF) band applications with other • Compatible with multiple Amtech-brand reader
types of battery-powered Tol Tags. The AT5140 TollTag is ideal for
mounting on a vehicle’s exterior if a metallic-coated windshield precludes installation of an interior windshield-mounted tag.
The AT5140 TollTag can be factory-programmed, as specified by the customer, or user-programmed in the field using the AP4110 Programmer. The tag stores up to 20 six-bit alphanumeric characters of data (120 bits). The tag can be programmed with special security characters unique to each customer or application to effectively prevent unauthorized tag use.
A small lithium battery cell energizes the AT5140 TollTag. The battery is compliant with U.S. DOT 49 CFR § 173.185(i) regulations for unrestricted shipment. Consult local agencies for regulations if the tag is to be shipped outside the United States. With continuous use, the average tag life is 10 years. The number of tag reads and external RF fields do not affect battery life.
The AT5140 TollTag encodes the signal received from an Amtech®-brand reader system with an identification number or a data message. The encoded signal reflects back (backscatters) to the Amtech reader system. TransCore’s Amtech-brand readers — series AI1200, AI1300, AI1400, and AI1600 — can read the AT5140 TollTag.
AT5140 Tol Tag® COMMUNICATIONS PHYSICAL ENVIRONMENTAL Frequency Range Dimensions Operating Temperature Size: 8.5 x 1.5 x 0.85 in
(21.6 x 3.8 x 2.2 cm) Weight: 3.8 oz (109.3 g) Typical Working Range ACCESSORIES With AR2200 RF Module/AI1620 Reader: Case Material AP4110 Programmer With AR2602 RF Module/AI1611 Reader:
Range depends upon system parameters. Mounting Surface Polarization Plug Removal Tool Kit Mounting Method SOFTWARE FEATURES
transportation tags is required, the AS8003
Plug Removal Tool Kit cleanly and easily
Tape Mounting: For applications where the Data Capacity
integrity of the mounting surface cannot be
without damaging circuitry or programming
port contact surfaces. Order replacement
on a smooth flat surface using double-sided
OWER REQUIREMENTS Power Source Lithium battery with 10-year average life For product information call: 1.800.923.4824 or 972.733.6600 (outside the U.S.) Fax 972.733.6486
2004 TC IP, Ltd. All rights reserved. TRANSCORE, TOLLTAG, and AMTECH are registered trademarks of TC IP, Ltd., and are used under license. All other trademarks
listed are the property of their respective owners. Contents subject to change. Printed in the U.S.A. Products covered by this document are protected by one or more of the
following U.S. patents 4,739,328; 4,782,345; and foreign equivalent patents. Other patents pending.
THE SADVAIDYASLA PRIVATE LIMITED. 13TH CROSS, M.G.S.ROAD, NANJANGUD – 571 301 Telephones: 08221-226299, 226407, Email: email@example.com Website: www.sadvaidyasala.com ESTABLISHED BY REVERED BHISHAGRATNA AYURVEDA VIDWAN LATE B.V.PUNDIT. CATALOGUE OF MEDICINES FOR USE AND INFORMATION OF REGISTERED MEDICAL PRACTITIONERS ONLY Engli
A. CLEANING THE SITE: It might be red and tender and may have dry, yellow crust. IMPORTANT—Keep tension off the site and tape the catheter to the abdomen. THREE STEPS TO CLEAN—1. Wash hands. 2. Prepare mixture of half water and half hydrogen peroxide. 3. Use solution to clean around the site With a Q-tip (gently loosen crust or drainage) and then dry gently. Will see normal