Rala.de

This chemical compatibility guide was assembled from known compatibility data for PTFE materials andshould be used only as a general guide for determining the suitability ofGORE sealants for specific applications. An independent study of the compatibility with your specificfluids is advised for confirmation of chemical compatibility. When immersion tests are performed withGORE sealants, the test sample must first be precompressed at 17.2 MPa (2500 psi) minimum.
Additionally, the adhesive and release paper should be removed from the immersion samples.
1 = Recommended (Little or No Effect) - = Insufficient DataN = Not Recommended - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - .
All the technical information and advice given here is based on our previous experience. We give this information to the best of ourknowledge, but assume no legal responsibility. Customers are asked to check these details and results, since the performance of a sealantcan only be judged when all the necessary operating data are available. Our product specialist would be glad to help you.
Specifications are subject to change without notice.
GORE and designs are trademarks of W. L. Gore & Associates, W. L. Gore & Associates GmbH, 2007W. L. Gore & Associates GmbH D-85639 Putzbrunn Germany Tel: +49(0)89 4612-2215 Fax: +49(0)89 4612-2306gore.com/sealants .
All the technical information and advice given here is based on our previous experience. We give this information to the best of ourknowledge, but assume no legal responsibility. Customers are asked to check these details and results, since the performance of a sealantcan only be judged when all the necessary operating data are available. Our product specialist would be glad to help you.
Specifications are subject to change without notice.
GORE and designs are trademarks of W. L. Gore & Associates, W. L. Gore & Associates GmbH, 2007W. L. Gore & Associates GmbH D-85639 Putzbrunn Germany Tel: +49(0)89 4612-2215 Fax: +49(0)89 4612-2306gore.com/sealants *) GORE sealants without adhesive are suitable for gaseous and liquid oxygen service. Insure that sealants arestored and handled in clean conditions. Consult BAM Oxygen Compatibility Test Report for further details aboutGORE Sealants in oxygen applications.
.
All the technical information and advice given here is based on our previous experience. We give this information to the best of ourknowledge, but assume no legal responsibility. Customers are asked to check these details and results, since the performance of a sealantcan only be judged when all the necessary operating data are available. Our product specialist would be glad to help you.
Specifications are subject to change without notice.
GORE and designs are trademarks of W. L. Gore & Associates, W. L. Gore & Associates GmbH, 2007W. L. Gore & Associates GmbH D-85639 Putzbrunn Germany Tel: +49(0)89 4612-2215 Fax: +49(0)89 4612-2306gore.com/sealants .
All the technical information and advice given here is based on our previous experience. We give this information to the best of ourknowledge, but assume no legal responsibility. Customers are asked to check these details and results, since the performance of a sealantcan only be judged when all the necessary operating data are available. Our product specialist would be glad to help you.
Specifications are subject to change without notice.
GORE and designs are trademarks of W. L. Gore & Associates, W. L. Gore & Associates GmbH, 2007W. L. Gore & Associates GmbH D-85639 Putzbrunn Germany Tel: +49(0)89 4612-2215 Fax: +49(0)89 4612-2306gore.com/sealants

Source: http://www.rala.de/tradepro/cms/site/news/chemical_compatibility_guide_08-07.pdf