Msds fatty acid methyl ester en v

Product Identification
Extinguishing media:
Unsuitable extinguishing
Company/undertaking Identification
Special protective equip-
avoid skin contact and use PVC out-fits. Other fire fighting consid-
with this product may heat up and burn spontaneously. Substance/Preparation (mixture)
Personal precautions: Remove the ignition source.
Environmental precautions: Contain spill to the smallest area
CAS Number
Procedures for spill/leak clean up: Collect spill with sand or dust
type “oil dry”.
Potential Health Effects
Handling: Keep away from strong oxidizers, ignition sources and
excessive heat.
Storage: Store in closed containers between 13°C and 49°C, in
well ventilated areas protected from sunlight. Do not store close to Inhalation:
Vapors or mist may be irritating to mucous mem- branes and cause irritation, dizziness and nausea. Ingestion:
Not reported accidental ingestion hazard. Environmental Hazards:
8 / EXPOSURE CONTROLS/PERSONAL PROTECTION Any material that contacts the eyes should be Exposure limits: Not known.
washed out immediately with water for at least 15 minutes. If easy to do, remove contact lenses. Get Respiratory protection: Use protective masks for organic products.
Skin protection: Use PVC outfits.
Wash with soap and copious amounts of water. Eye protection: Use safety glasses and safety mask
Carry the patient to a ventilated place with fresh air. Ingestion:
Drink one or two glasses of water. If gastrointesti-nal symptoms develop, consult a physician. General Information
Discharge, treatment or disposal may be subject to national, state or local laws. Waste incineration with the approval of the responsible Physical state:
Flash point:
This material is NOT dangerous for air, ground or marine transport. Boiling point:
For additional transport information please contact: ADVANCED Specific Gravity:
Vapor pressure:
Melting point:
Evaporation rate:
Explosive limits:
Auto ignition temperature: 177°C
NFPA Ratings: Health: 0; Flammability: 1; Reactivity: 0; Special:NA Conditions to avoid: No data available.
Materials to avoid: Strong oxidizing agents.
Hazardous decomposition products: Carbon monoxide, carbon
Hazardous polymerization: Will not occur.
Irritation data
This product has a low potential to cause allergic skin reactions This product has a low potential to cause allergic eyes reactions Toxicity data
Oral: LD50 >2000 mg/Kg (Rabbit); Dermal: LD50 >5000 mg/Kg (Rat); Inhalation: Not known This material has not been tested for environmental effects. The above information is believed to be right but does not purport to be all exclusive and shall be used only as a guide. ADVANCED ORGANIC MATERIALS S.A. shall not be held liable for any damage resulting from handling contact with the above product.


A-1-24 amaryllis.pmd

Horticulture Center Demonstration & Community Gardens at East Meadow Farm Amaryllis Blooms come along rapidly after you plant an Amaryllis bulb –– some within 21 days. Care of the Bulb After Planting Place the newly-potted bulb on a sunny window sill in acool room (55-65° F). Water only when the top layer ofsoil in the container feels very dry to the touc

Microsoft word - novo_requerimento_modelo 1 out 2009.rtf

CASA CIVIL DA PRESIDÊNCIA DA REPÚBLICA SECRETARIA EXECUTIVA/ARQUIVO NACIONAL COORDENAÇÃO REGIONAL NO DISTRITO FEDERAL Eu, _______________________________________________________________________________________, portador(a) da Carteira de Identidade nº_____________________________________, expedida pela _________, e do CPF nº__________________, filho(a) de_____________________

Copyright ©2018 Sedative Dosing Pdf