Pharmacie sans ordonnance livraison rapide 24h: acheter viagra en ligne en France.
Guidelines for supplying imagesfor printing in Australian Wood Review
In general we require images of the highest quality. There are some differences in our requirements for images supplied by authors and images supplied for competition and book submissions.
• Set your camera to the highest quality setting available.
We can accept PSD, RAW, TIFF and JPG images, however, we prefer PSD
or RAW. JPG images are significantly lower in quality than PSD or RAW, as they are compressed, however we can accept them if you
are not able to supply other formats.
• We prefer images taken on a Digital SLR camera.
• Good focus is essential.
It is best to use a tripod as this keeps your camera steady and prevents blurring. Make sure your camera
is focused on the main object you are framing.
• Ensure you have good, adequate lighting.
Natural light from a nearby window or door should do the trick. If possible, try and shoot
all photos in the same light, to ensure consistency across your published article.
• If you know how, set the white balance before you begin shooting in a new location.
This will ensure even colour tones
throughout all your images. If the white balance is set to auto, it may differ in each image. The correct white balance setting will
differ depending on where you are, eg. natural light is a different colour to the light that comes from say, fluorescent lights.
• Think carefully about how you are composing and framing your images.
A neutral background is preferred for images supplied
of finished work, and for competition and book submissions. A white background, or as pale as you can possibly manage is best.
Pay attention to objects in the background which may distract. Watch out for things like shaggy rugs, wrinkled sheets, leaves and
grass as these can end up being visible over the feet or base of your finished furniture piece. If you are an author supplying images
for a story it is also nice for people to be able to see your workshop, and we know our readers like studying the backgrounds of
photos, so think about what would look best in the background of your photo. Workshops can sometimes have a lot of grey surfaces
(corrugated iron roll-a-doors, concrete floor, machine tables). If you are taking a series of in-progress shots of a smaller item for a
project type article consider using a sheet of melamine or a pale not too-woody surface as a non-distracting, lighter background.
• Put your best face forward.
It’s nice to be able to see the person who is writing the story, so please take some photos that
include yourself in the image. We like to have some photos of people working.
• We want to use photos straight from your camera—which means un-edited and un-changed.
Do not try to remove the
background from an image using the Magic Wand tool or any other method, to produce a white background. If this is needed, we
prefer to do this ourselves using our methods. If you want a white background on your image, it is best to actually take the photo
on a white paper background. Coloured background usually reflects coloured light onto the item your are photographing. If you are
unsure, please contact us with any queries you have, before you take the photos. Please note: work shown in photos for competition
and book submissions must not be digitally edited.
• If you are an author and absolutely must alter your photo using Photoshop
, or if you are a professional, trained Photoshop user,
re-save it as a PSD file. Do not re-save a file in JPG format. JPG files are compressed files. Every time a JPG is re-saved, it will lose
quality and become pixelated. Keep the image in RBG colour mode too. But once again, we prefer to do all image editing ourselves,
to ensure consistent results over the entire magazine. This includes adding drop shadows.
• Do not use any other photo editing program apart from Photoshop to edit, manipulate, brighten, or change your images in any
You may think you are improving them, but in actual fact you may be making the image worse. What looks good on screen
doesn’t always look good printed. Different monitors show colours and brightness differently. If you really, really, really want to edit
your photos anyway, then send us both the original file and your edited version.
• Title image.
If you are an author it is great if you can supply an image to be the lead-in photo of the article, a generic-type shot,
perhaps including yourself. If supplying images for competition and book submissions include a good image of yourself with your
piece as well.
Please supply your images in the correct order
Please supply text captions for all of your images.
in which they should appear in the article.
This greatly assists us with the layout.
Captions for images should be supplied in a separate text
eg: Table01.tiff, Table02.tiff, Table03.tiff.etc
Image 1: IMG4778.jpg Machine cutting the side rails Image 2: IMG4763.jpg Gluing up the frame Image 3: IMG4854.jpg etc etc
OR by providing a list of photo captions
Captions can be more descriptive if you wish, and even include additional information to what is in the main text.
Backgrounder 3 Novolizer®: significant advance in inhalation therapy for improved asthma management Following a symposium at last year’s European Respiratory Society congress Professor Peter Barnes (Imperial College, London) concluded that “Inhaled therapy is likely to remain predominant in the future and the type of inhaler is just as important as the class of drug in the long-
Tadacip 20 mg kaufen - Generik Cialis > Tadacip 20 mg kaufen - Generik Cialis Potenzmittel- Beschreibung: Diese Tabletten werden zur Behandlung von Impotenz und gelegentlichenPotenzschwierigkeiten eingesetzt. Bestehende Krankheiten, Stress undLeistungsdruck gehen häufig einher mit Erektionsproblemen. Was tun, wenn dasStehvermögen vermindert ist? Oft bleibt nur der unerwünschte Ga