Bioguard burn out 35
MATERIAL SAFETY DATA SHEET
BioGuard Burn Out 35
MSDS Ref. No:
1. PRODUCT AND COMPANY IDENTIFICATION
BioGuard Burn Out 35GENERAL USE:
Swimming pool shock.CHEMICAL FAMILY:
24 HR. EMERGENCY TELEPHONE NUMBERS
Poison Control Center (Medical) :
(877) 800 - 5553
CHEMTREC (US Transportation) :
(800) 424 - 9300
Lawrenceville, GA 30049-1002Customer SERVICE:
EPA Registration Number: 5185-323
2. COMPOSITION / INFORMATION ON INGREDIENTS
3. HAZARDS IDENTIFICATION
White, granular solid with chlorine odor.
DANGER: Corrosive: Causes irreversible eye damage or skin burns. May be fatal if swallowed. Harmful if
inhaled. Do not get in eyes, on skin, or on clothing. Avoid breathing dust. Wear goggles or safety glasses, protective clothing and rubbergloves when handling. Wash hands thoroughly with soap and water after handling and before eating, drinking or using tobacco. Removecontaminated clothing and wash before reuse.
POTENTIAL HEALTH EFFECTS
DANGER: Corrosive. Causes severe eye damage. May cause blindness. Do not get in eyes.
DANGER: Corrosive: Causes skin burns. Do not get on skin.
May be fatal if swallowed.
Harmful if inhaled. Avoid breathing dust.
Prolonged inhalation of excessive levels of dust may cause lung damage. See section 11 for more information.
ROUTES OF ENTRY:
Skin Contact, Inhalation, Ingestion, Eye Contact.
BioGuard Burn Out 35
4. FIRST AID MEASURES
If contact with eyes occurs: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present,
after 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.
If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison
control center or doctor for treatment advise.
If swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to
swallow. Do not induce vomiting unless told to by a poison control center or doctor. Do not give anything by mouth to an unconscious person.
If inhaled: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration,
preferably mouth-to-mouth, if possible. Call poison control center or doctor for treatment advice.
NOTES TO PHYSICIAN:
Lithium hypochlorite is corrosive to eyes, skin and mucous membranes. Consideration should be given to careful
endoscopy as stomach or esophageal burns, perforations or strictures may occur. Careful gastric lavage with an endotracheal tube in placeshould be considered. Observation may be warranted. Treatment is controlled removal of exposure with symptomatic and supportive care.
5. FIRE FIGHTING MEASURES
FLASHPOINT AND METHOD:
Strong oxidizer. Contact with combustible material may cause a fire or explosion.
In case of fire or smoke, call the fire department. Do not attempt to extinguish the fire without a self-contained
breathing apparatus (SCBA). Do not let the fire burn. Flood with copious amounts of water. DO NOT use ABC or other dry chemicalextinguishers since there is the potential for a violent reaction.
HAZARDOUS COMBUSTION PRODUCTS:
Combustion product may include, but are not limited to, oxygen and toxic chlorine gases.
FIRE FIGHTING PROCEDURES:
Flood with copious amounts of water.
FIRE FIGHTING EQUIPMENT:
Firefighters should wear full protective clothing and self contained breathing apparatus (SCBA).
Thoroughly decontaminate fire fighting equipment including all fire fighting wearing apparel after the incident.
6. ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Using appropriate protective
clothing and safety equipment, contain spilled material. Do not add water to spilled material. Using clean dedicated equipment, sweep andscoop all spilled material, contaminated soil, and other contaminated material and place into clean dry containers for disposal. Do not use floorsweeping compounds to clean up spills. Do not close containers containing wet or damp material. They should be left open to disperse anyhazardous gases that may form. Do not transport wet or damp material. Keep product out of sewers, watersheds and water systems. Do notcontaminate water, food, or feed by storage or disposal or cleaning of equipment. Dispose of according to local, state and federal regulations.
7. HANDLING AND STORAGE
Avoid contact with eyes, skin or clothing. Avoid breathing dust or fumes.
STRONG OXIDIZING AGENT: Do not mix with other chemicals, except water. Mix only with water. Never add water to
product. Always add product to large quantities of water. Use clean dry utensils. Do not add this product to any dispensing device containingremnants of any other product. Such use may cause a violent reaction leading to fire or explosion. Contamination with moisture, organicmatter or other chemicals will start a chemical reaction and generate heat, hazardous gas, possible fire and explosion. In case of contaminationor decomposition, do not reseal container. If possible, isolate container in open air or well ventilated area. Flood area with large volumes ofwater.
Keep this product dry in its original container. (for bags: Store dry product in its original unopened bag until use. For partially used
bags, fold over top of bag and secure with adhesive tape. for bottles: Store dry product in orginal tightly closed container when not in use. )Store unopened and partially used containers in a secure location away from children. Store in a cool, dry, well ventilated area away from heator open flame. Moisture may decompose this product and cause a violent reaction leading to fire and explosion. In case of decomposition,isolate container if possible and flood area with large amounts of water to dissolve all material before discarding this container. Do not
BioGuard Burn Out 35
contaminate food or feed by storage or disposal.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)
OSHA TABLE COMMENTS:
N/E = Not Established
General room ventilation plus local exhaust should be used to minimize exposure to dust/vapors.
PERSONAL PROTECTIVE EQUIPMENT:
EYES AND FACE:
Wear goggles or safety glasses with side shields when handling this product.
Wear rubber gloves when handling this product. Avoid contact with skin.
A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever
workplace conditions warrant a respirator's use.
WORK HYGIENIC PRACTICES:
Remove and wash contaminated clothing before reuse.
OTHER USE PRECAUTIONS:
Facilities storing or utilizing this material should be equipped with an eyewash and safety shower.
Exposure Limits: Particulates Not Otherwise Classified (PNOC): ACGIH TWA 10 mg/m3 (total dust); 3 mg/m3 (respirable
9. PHYSICAL AND CHEMICAL PROPERTIES
11 (1% solution @ 25 C)BOILING POINT:
Not AvailableMELTING POINT:
135°C (275°F) (decomposes)THERMAL DECOMPOSITION:
135°CSOLUBILITY IN WATER:
43g/100g waterSPECIFIC GRAVITY:
0.9 to 1.0 g/ccOXIDIZING PROPERTIES:
10. STABILITY AND REACTIVITY
CONDITIONS TO AVOID:
High temperature. Poor ventilation. Contamination. Moisture/high humidity.
This product is stable under normal conditions.
Hazardous polymerization will not occur under normal conditions.
BioGuard Burn Out 35
HAZARDOUS DECOMPOSITION PRODUCTS:
Oxygen and toxic chlorine gases.
This is a strong oxidizing agent. Avoid contact with water on concentrated material in the container. Keep
away from household soap, suntan lotion, paint products, solvents, acids, beverages, lighted cigarettes, combustible materials, garbage, dirt,dirty rags, organic materials and other swimming pool/spa chemicals in their concentrated forms. Mixing with any of the above materials caninitiate a hazardous decomposition. Contact with acids or moisture evolves chlorine gas. Reacts with ammonia, urea and amines (can formreactive and toxic chloramines). Metal oxides can cause decomposition.
11. TOXICOLOGICAL INFORMATION
8100 mg/kg of body weight in rabbits.
555 mg/kg of body weight in rats
2.0 mg/l (rats)
ACUTE EFFECTS FROM OVEREXPOSURE:
This product is corrosive to eyes, skin, respiratory tract and mucous membranes.
This product is corrosive to eyes.
This product is corrosive to skin.
This product is not a skin sensitizer.
This product is not listed as a carcinogen by IARC.
This product is not listed as a carcinogen by NTP.
This product is not listed as a carcinogen by OSHA.
This product is not mutagenic in several in vitro tests.
This product did not cause developmental effects in a study with laboratory animals.
12. ECOLOGICAL INFORMATION
This pesticide is toxic to fish and aquatic organisms. Do not contaminate water by cleaning of
equipment or disposal of wastes. Do not discharge effluent containing this product into lakes, streams, ponds or estuaries, oceans, or otherwaters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permittingauthority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previouslynotifying the local sewage treatment plant authority. For guidance contact your State Water Board or Regional Office of the EPA.
Oral LD50 = 1,960 mg/kg; 5 day dietary LC50 > 17,240 ppm (no deaths at maximum dose.)Bobwhite Quail:
5 day dietary LC50 > 17,240 ppmFish:
96 hr LC50 = 0.69 mg/LBluegill:
96 hr LC50 = 0.97 mg/LInvertebrates:
48 hr LC50 = 0.37 g/L(daphnia magna)
13. DISPOSAL CONSIDERATIONS
Pesticide wastes are toxic. Improper disposal of excess pesticide or rinsate is a violation of Federal Law. If these
wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency or theHazardous Waste Representative at the nearest EPA Regional Office for guidance. Do not contaminate water, food, or feed by storage ordisposal or cleaning of equipment. Do not put product, spilled product, or filled or partially filled containers into the trash or waste compactor.
Contact with incompatible materials could cause a reaction or fire.
Do not reuse container. Rinse thoroughly before discarding in trash.
14. TRANSPORT INFORMATION
BioGuard Burn Out 35
DOT (DEPARTMENT OF TRANSPORTATION)
PROPER SHIPPING NAME:
Oxidizing Solid, N.O.S. (Lithium hypchlorite, mixture)PRIMARY HAZARD CLASS/DIVISION:
5.1 (Oxidizer)UN/NA NUMBER:
IIIOTHER SHIPPING INFORMATION:
Limited Quantity or ORM-D Consumer Commodity exemption if applicable.
Not recommended for transport by air.
15. REGULATORY INFORMATION
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
311/312 HAZARD CATEGORIES:
NO PRESSURE GENERATING:
313 REPORTABLE INGREDIENTS:
This product contains lithium carbonate which is a substance subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right-to-Know Act of 1986.
CERCLA (COMPREHENSIVE RESPONSE, COMPENSATION, AND LIABILITY ACT)
This product or its components are not listed.
TSCA (TOXIC SUBSTANCE CONTROL ACT)
This product or its components are not subject to export notification.
All components except for Lithium Chlorate, an impurity, are listed.
OSHA HAZARD COMM. RULE:
Product is hazardous by definition of the Hazardous Communication Standard.
CLEAN WATER ACT:
FIFRA (FEDERAL INSECTICIDE, FUNGICIDE, AND RODENTICIDE ACT):
This product is a registered pesticide.
SDWA (SAFE DRINKING WATER ACT):
FDA (FOOD AND DRUG ADMINISTRATION):
DEA (DRUG ENFORCEMENT PRECURSOR & ESSENTIAL CHEMICALS) LISTED SUBSTANCE:
16. OTHER INFORMATION
Regulatory Affairs Department
Revision #: 8 This MSDS replaces the February 14, 2005 MSDS. Any changes in information are as follows: In
Section 1 Product Code In Section 14 DOT Proper Shipping Name DOT Primary Hazard Class/Division DOT UN/NA Number Other DOTShipping Information IATA Note
4 = Severe3 = Serious2 = Moderate1 = Slight0 = Minimal
BioGuard Burn Out 35
NFPA STORAGE CLASSIFICATION:
NFPA Oxidizer Class 1
The contents and format of this MSDS are in accordance with OSHA Hazard Communication Standard, National Fire Protection
Association (NFPA), and Hazardous Materials Identification System (HMIS).
MANUFACTURER DISCLAIMER: IMPORTANT:
The information is given without a warranty or guarantee. No suggestions for use are
intended or shall be construed as a recommendation to infringe any existing patents or violate any federal, provincial, state, municipal, or local
laws. Safe handling and use is the responsibility of the customer. Read the label before using this product. This information is true and
accurate to the best of our knowledge.
FIRST PRIORITY, INC. Date: September 27, 2004 PRODUCT NAME: FUROSEMIDE SYRUP 1% This Material Safety Data Sheet is being provided to your company, for the purpose of providing current health and safetyinformation to your management and employees who work with this product. Please read the data provided and then provideit to those people at your company who have the responsibility to
Mod. 4 - Prest. DENUNCIA D'INFORTUNIO CICLO LAVORATIVO Lavorazione svolta (azienda agricola vedi nota 7)Reparto o cantiere in cui la lavorazione è stata svoltaDATI RETRIBUTIVI OCCORRENTI PER LA DETERMINAZIONE DELLA RETRIBUZIONE MEDIA GIORNALIERA ESPOSTI AL LORDO (8) vedi istruzioni LA RETRIBUZIONE (PAGA BASE + CONTINGENZA + SCATTI ANZIANITA', ECC.) E' COMPUTATA SU BASE:Ore Sett. A