Diamond Coatings Limited, a privately owned company, is a recognised leader in the production of vacuum
coatings which includes the DIAMOX Indium Tin Oxide (ITO) range. The ITO coating is a highly conductive
transparent coating which is available deposited on glass or plastic substrates.
The Diamox ITO range is used for in a wide range of applications including electromagnetic/radio-frequency
(EMI/RFI) shielding, electrostatic protection (ESP), optically clear heated filters for electronic displays and the
active component in touch screens. The Company supplies a large number of OEM’s in the electronic and
electrical industries in Europe, USA and the Far East.

The Company has a reputation for innovation having developed the Diamox process and designed and built it’s
own coating plant to deposit the indium tin oxide onto the substrate. The Diamox process is carried out at low
temperatures in a vacuum, allowing a variety of plastics including polycarbonate, acrylic and polyester as well
as glass to be coated. A flexible system for handling the substrate allows both flat and curved surfaces, as well
as a range of injection moulded shapes, to be coated. The plant is capable of coating substrates up to 1000mm x
1000mm and with a sheet resistance between 8 and 1500 ohms/square.
Diamox coatings can be applied to free issue parts. Alternatively Diamond can provide fully machined and
finished display filters in glass, polycarbonate or acrylic. Display components can de screen printed in standard
or conductive inks and can also incorporate anti-glare and scratch resistant features.

Transmission, absorption and reflectivity are determined by the characteristics and colour of the coated
substrate. For optimum transmittance, the thickness of the coating is chosen to relate to the wavelength for each
application. Normally coatings are designed for optimum transmittance between 525 & 600nm. Typical
transmission for a 20 ohms/sq coating on glass is 84%

coated polycarbonate has been subjected to the following accelerated tests:-
Thermal Cycling to MIL STD C 48497, (5h at –60˚ C followed by 5h at +70˚ C)
Salt Solution to MIL STD C48497, (24h immersion in 5% NaCl solution)
Humidity Cycling to MIL STD C 48497 (24h 50˚ C 95%humidity)
Coating adhesion was tested to ASTM D 3359-83 method B
There was no evidence of optical degradation or coating adhesion and only a small change in sheet resistance on
thermal cycling.
Unit 11 • Lodge Forge Trading Estate • Cradley Road • Cradley Heath • West Midlands • B64 7RW Tel: 01384 566222 • Fax: 01384 562826 • WWW.diamondcoatings.co.uk • enquiries@diamondcoatings.co.uk
Sheet Resistance.
Sheet resistances are available from 8 to 1500 ohms/square.
Shielding Effectiveness.
Typical shielding effectiveness, measured using test methods consistent with MIL-STD-215, are summarized in
Table 1.
TABLE 1 Shielding Performance of Diamox Coated Polycarbonate
Sheet Resistance


Glass. Standard annealed glass is supplied as per BS EN 572 Parts 1 & 2 (1995) Special optical
glasses, toughened and chemically strengthened glasses are also available.

Polycarbonate Supplied as per BS EN ISO 11963 (1996).
Acrylic Supplied as per BS EN ISO 7823 (Parts 1 & 2). A wide range of colours are available. The acrylic has
a scratch resistant coating before ITO coating to improve the adhesion properties.

It is the objective of Diamond to produce coatings to high quality standards consistent with commercial product
requirements and appropriate standards. Witness samples are included in each coating run and checked for light
transmission and sheet resistance.
Diamond is registered to ISO9001:2002 and employs the practice of quality control throughout the
manufacturing process. The Company undertakes continual quality assessment and improvements.
Unit 11 • Lodge Forge Trading Estate • Cradley Road • Cradley Heath • West Midlands • B64 7RW Tel: 01384 566222 • Fax: 01384 562826 • WWW.diamondcoatings.co.uk • enquiries@diamondcoatings.co.uk

Source: http://www.diamondcoatings.co.uk/datasheet/diamox.pdf


SOUTHERN PARK COUNTY FIRE PROTECTION DISTRICT Meeting Minutes for Aug, 4, 2011 Public Meeting 1) Call to order: Chairman Calanni called meeting to order at 7:05PM 2) Introduction of Guests : None 3) Attendees: Board members Sam Calanni, Amy Mason and Harry Gintzer. Board members Anita Long and Flip Boettcher had excused absences. Also present were Board Secretary Roberta

Microsoft word - nhp application - afa.doc

APPLICATION FORM – CONFIDENTIAL FIRST PAGE – TO BE COMPLETED BY APPLICANT EMPLOYEE DETAILS Employer: confidential mail: Treatment Support is a vital part of the AfA programme. Contact details must be supplied in order that we can provide you with this support. Would you like to receive SMS notification Would you like to receive information via OTHER DOCTORS OR SPECI

Copyright ©2018 Sedative Dosing Pdf